離心泵應該如何保管

　　①尚未安裝好的泵在未上漆的表面應涂覆一層合適的防銹劑，用油潤滑的軸承應該注滿適當?shù)挠鸵�，用脂潤滑的軸承應該僅填充一種潤滑脂，不要使用混合潤滑脂。
　�、� not yet installed pumps in unpainted surface shall be coated with a layer of suitable anti-rust agent, oil lubricated bearings should be filled with the appropriate oil, with grease lubricated bearings should only be filled with a kind of grease, do not the use of mixed grease.

　�、诙虝r間泵人干凈液體，沖洗，抽吸管線，排放管線，泵殼和葉輪，并排凈泵殼，抽吸管線和排放管線中的沖洗液。
　�、� short-term pumped clean liquid, washing, suction pipes, discharge pipes, pump casing and impeller, side by side, the net pump casing, suction and discharge pipelines pipelines in the rinse solution.

　�、叟艃糨S承箱的油，再加注干凈的油，徹底清洗油脂并再填充新油脂。
　�、� row of net bearing boxes of oil, coupled with clean injection of oil, grease thoroughly cleaned and re-populate the new grease.

　�、馨盐�人口和排放口封起來，把泵貯存在干凈，干燥的地方，保護電機繞組免受潮濕，用防銹液和防蝕液噴射泵殼內(nèi)部。
　�、� the suction seal population and discharge up to pump stored in clean, dry place, protecting motor windings against moisture, with anti-rust liquid and corrosive liquid jet pump inside the shell.

　�、荼幂S每月轉(zhuǎn)動一次以免凍結(jié)，并潤滑軸承。
　　⑤ pump shaft rotation once a month so as not to freeze, and lubricated bearings.